|Deutsch|Español|| 

News Archives

<< Back to Latest News

Articles Found: 18
Page: 1 | 2 | 3 | 4 |

11/1/2011 - New Conax Semiconductor Bulletin - 6003C
New Conax Semiconductor brochure contains expanded view of some of the unique products we manufacture for the semiconductor industry. View our newly created section which features the Profile and Spike Diffusion/Oxidation furnace thermocouple.

1/3/2011 - New Catalog 5001C Rev 8-10 Pressure & Vacuum Sealing

ANNOUNCING REVISED CONAX CATALOG 5001C - Pressure and Vacuum Sealing Assemblies

Conax Technologies designs and manufactures a complete line of pressure/vacuum mechanical sealing glands and assemblies for wires and probes for virtually every industry. A wide range of catalog standard sealing glands are available from stock, while unlimited custom designs are also available for unique wire or probe sealing applications. Click on the link here to request your new catalog or visit our website.

 

8/26/2010 - Profile and Spike Thermocouples for Furnaces

Conax Semiconductor supplies Profile and Spike Thermocouples for most common brands of Horizontal and Vertical Diffusion Furnaces. The thermocouples are available in R, B and K calibrations and in wire sizes ranging from 0.5mm (0.020") to 0.25mm (0.010"). We also offer a Platinum exchange program. For more information call Mike Ferraro 716.684.4501 ext - 287 or check out our Semiconductor website - www.conaxsemiconductor.com.

6/30/2010 - Hazardous Location Temperature Sensor

The new CT 600 Series sensor-terminal head assemblies are available in all thermocouple calibrations and in RTD assemblies with 100, 200, 500 and 1000 ohm platinum, 10 ohm copper or 120 ohm nickel elements. Assemblies are available with stainless steel or Inconel sheaths, a spring loaded mounting fitting (CSLW) and explosion-proof terminal head with terminal strip. Note: Sensor must be installed into either a thermowell or a port machined into a solid metal piece with a ½-14 NPT mounting connection made per ANSI/ASME B1.20.1 and gauged to + ½ to +2 turns from flush with end of start thread in accordance with CSA Std. C22.2 0.5 and UL Std. 1203, A 36 maximum bore depth, a 0.104" minimum wall, and a Ø0.302" maximum bore.

9/10/2009 - Distinguishing Conax Technologies from Conax Florida

Conax Technologies LLC - previously known as Conax Buffalo Technologies - became an independent corporation in 1987 after separating operations from Conax Florida Corporation, now owned by Cobham Plc. For the past 22 years, Conax Technologies and Conax Florida have had no shared ownership even though they do have similarities with the name Conax.

On July 16th, 2009 the St. Petersburg Times reported that five federal agencies under the direction of the Defense Criminal Investigative Service raided Conax Florida Corp. for reasons currently unknown to the public.

Conax Technologies LLC is in no way connected with whatever were the reasons for the raid conducted by the federal government on Conax Florida Corp.