Furnace & Autoclave

Autoclave-Solutions

Furnace & Autoclave

Categories: , , ,
   

Product Description

Engineered Solutions for the Furnace and Autoclave Industry

For more than 50 years, Conax Technologies has served as a leading source of temperature sensor and pressure/vacuum sealed fittings feedthroughs for the Furnace and Autoclave Industry. Our temperature sensors and fitting/feedthrough assemblies are installed in various equipment types such as furnaces, ovens, kilns, autoclaves, freeze-dryers, vacuum furnaces, etc. Conax has various standard products for each of these equipment types but also has the capability to custom design a solution for any application or equipment. Feel free to contact our Autoclave Application Engineers today to discuss your application.

Solutions for Furnaces, Autoclaves, Freeze Dryers and Lypholizers

Solutions for Furnaces, Autoclaves, Freeze Dryers and Lypholizers

Providing Power

Conax Technologies sensors and seals are used in various processes in the Furnace and Autoclave Industry. From monitoring product temperature in sterilization chambers to providing power to a fan or heater, Conax has a solution for you. Our products are commonly found in processes such as sterilizing, curing, heat treating, glass laminating, vacuum processing, vulcanizing and many more. Describe your process to our application engineers and they will design a standard or custom solution.

If you need to provide power to a fan, motor, heater or other AC or DC powered device, Conax has two great solutions covering virtually any power feedthrough requirement.
Our power series compression seal fittings are simple and reliable mechanical pressure and vacuum seal fittings to supply high voltage or current to your equipment and protect your environment.

hegpk
Single Electrode Style

For detailed information please visit:

  • High Voltage Power Feedthrough (EGT)
  • High Voltage/Pressure Power Feedthrough (HEGPK)
  • High Temperature Power Feedthrough (EG)

Our single electrode style compression seal fittings allow for up to 525 amps per single electrode at up to 8000 VDC.

  • Electrode diameters: from .093” to 1.00” (23.6 to 25.4 mm)
  • Rated up to 8,000 Volts DC
  • Rated up to 525 amps
  • Seal capability up to 8,000 PSI (551 Bar)
  • Temperature Range: -300ºF to 1600ºF(-184º to 871ºC)
pl_thumb-1
Power Lead Style

Our Power Lead (PL) compression seal feedthroughs provides multiple sealed, insulated wires for inserting power into an autoclave or furnace.

  • Multiple 20 AWG to 8 AWG lead wire available in a single fitting
  • 600 volt rated
  • Up to 55 amps per wire.
  • Seal capability up to 10,000 PSI (689 Bar)
  • Temperature Range: –300ºF to 450ºF(-184º to 232ºC)
autoclave_hybrid_thumb
Hybrid Electrode Style - field re-buildable ‘plug and play’ solution.

Don’t see what you need?

Contact our Application Engineers to explain your process and we will provide a solution.
Also be sure to read the Case Study that describes our custom heater power feedthrough for an aerospace parts autoclave. It portrays our wide range of capabilities.

Temperature Sensors 

Conax Technologies is the industry leader in the design and fabrication of temperature measurement devices. Conax temperature and control sensors are used throughout the Furnace and Autoclave Industry in a variety of processes.

Thermocouples and RTD’s


thermocouple_assemblies_standardStandard Thermocouple Assemblies

Operating Temperature up to 2300ºF (1260º C)

  • Available in Types J, K, E, N and T
  • Inconel, Stainless Steel, and other sheath materials available
  • Sheath Diameter: 0.020” - 0.375” (0.51 - 9.53 mm)

AL25-T5AL, 4/10/01, 10:06 AM, 8C, 909x3940 (1465+640), 100%, ProsTarget 5.0, 1/30 s, R20.6, G18.2, B60.1

High Temperature Thermocouple Assemblies
Operating Temperature up to 4200ºF (2315º C)

  • Available in Types S, R, B, and C
  • Alumina, Molybdenum, Tantalum, Platinum sheath materials
  • Other sheath materials available upon request
rtdResistance Temperature Detectors (RTD’s)
Operating Temperatures up to 1472º F (800º C)

  • Available in class A and B tolerances (EN 60751)
  • Inconel, Stainless Steel, and other sheath materials available
  • Sheath Diameter: 0.125” to 0.250” (3.18 - 6.35 mm

Don’t see what you need?

Contact our Application Engineers to discuss your application and we will provide a solution.  You may also visit Our Solutions to learn more about applications that may be similar to what you need to accomplish.

Instrumentation Feedthroughs

Conax Technologies sealed feedthroughs and compression seal fittings have proven to be the industry leaders in quality and performance. We are the originators of soft sealant technology that, when combined with mechanical compression, results in a remarkably secure seal on wires, probes, and electrodes passing through a pressure or environmental boundary. The solutions listed below are commonly used products for the Furnace and Autoclave Industry. If you have a custom need, visit our Our Solutions section or simply give us a call and we will provide a solution for your application.

Feedthroughs with Factory Installed Lead Wire (available in Copper or Thermocouple Wire)...


tg24t_160General Purpose Instrument Lead (TG – 24T)

  • 2 – 24 Wires #24 AWG Teflon Insulated
  • Temperature Range: -300º to 450º F (-184º to 232º C)
  • Vacuum to 8,000 PSI (551 Bar)
  • 100 VDC Rated


tg24f_160High Temperature Instrument Lead Feedthrough (TG – 24F)

  • 2 – 24 Wires #24 or #20 AWG Fiberglass Insulated
  • Temperature Range: -300º to 1,400º F (-184º to 760º C)
  • Vacuum to 300 PSI (21 Bar)
  • Instrument Level Signals: 10 VDC Max


pl_thumb-1High Pressure Ruggedized Feedthrough (PL)

  • 1 – 18 Wires #20 to #8 AWG Kapton Insulated
  • Temperature Range: -300º to 450º F (-184º to 232º C)
  • Vacuum to 10,000 PSI (689 Bar)
  • 600 VDC Rated


autoclave_hd_thumbHigh Density Wire Feedthrough (HD)

  • 12, 24, 40, 60 Wire Feedthroughs #24AWG PTFE Insulated
  • Temperature Range: -112º to 250º F (44º to 121º F)
  • Vacuum to 5,000 PSI (345 Bar)

Feedthroughs without Factory Installed Lead Wires

*Operating Temperatures: - 400º to 1600ºF (-240º- 871ºC)
Vacuum to 10,000 PSI (689 Bar)


autoclave_multiple_thumbMultiple Probe or Wire Seal Fitting

  • For multiple probes or wires .020” through .125” (.508 - 3.175 mm) Diameter (MHC)
  • For maximum capacity of probes or wires and custom sizes (MHM)

Seals for Sensors including Vibration Sensors, Humidity Sensors, Pressure Sensors, Control Senors, etc.

  • Single probes or sensors (PGS)
  • Multiple probes or sensors (SPG & DSPG)

flangmount_kf_thumAll Feedthroughs Available with Mounted Flanges

Conax Technologies provides many flange styles to match your mounting requirements. Flanges are available in variety of materials including 304SST and 316SST.
Alternate materials and grades available.

Solutions for Ovens and Kilns

Conax Technologies is the industry leader in the design and fabrication of temperature measurement devices. Conax temperature and control sensors are used throughout the Furnace and Autoclave Industry in a variety of processes.

Thermocouples and RTD’s


thermocouple_assemblies_standardStandard Thermocouple Assemblies

Operating Temperature up to 2300ºF (1260º C)

  • Available in Types J, K, E, N and T
  • Inconel, Stainless Steel, and other sheath materials available
  • Sheath Diameter: 0.020” - 0.375” (0.51 - 9.53 mm)

AL25-T5AL, 4/10/01, 10:06 AM, 8C, 909x3940 (1465+640), 100%, ProsTarget 5.0, 1/30 s, R20.6, G18.2, B60.1

High Temperature Thermocouple Assemblies
Operating Temperature up to 4200ºF (2315º C)

  • Available in Types S, R, B, and C
  • Alumina, Molybdenum, Tantalum, Platinum sheath materials
  • Other sheath materials available upon request
rtdResistance Temperature Detectors (RTD’s)
Operating Temperatures up to 1472º F (800º C)

  • Available in class A and B tolerances (EN 60751)
  • Inconel, Stainless Steel, and other sheath materials available
  • Sheath Diameter: 0.125” to 0.250” (3.18 - 6.35 mm

Don’t see what you need?

Contact our Application Engineers to discuss your application and we will provide a solution.  You may also visit Our Solutions to learn more about applications that may be similar to what you need to accomplish.

Reviews

There are no reviews yet.

Be the first to review “Furnace & Autoclave”

Your email address will not be published. Required fields are marked *

Conax Technologie