by conax_admin | Sep 19, 2017
The Problem: Liquid Natural Gas requires a lot of power for gas compression. At this site 27 GE Frame 5 gas turbines, manufactured by Nuovo Pignone are used for this process. The original equipment exhaust gas sensors on these turbines are not robust enough to survive...
by Jill Ahrens | Apr 15, 2016
Conax helps engineer a custom sensor design that can withstand liquid motion forces inside cold storage tanks to ensure accurate monitoring. Company: Liquid and Liquified Gas Storage Tank Manufacturer Challenge: The customer has three tank monitoring challenges for...
by Jill Ahrens | Apr 15, 2016
Conax provided a severe duty cast iron pipe clamp thermocouple to withstand physical field abuse. Industry: Cryogenics Application: Liquid Nitrogen Tanks Customer Requirement: This manufacturer of liquid nitrogen tanks was using a conventional pipe clamp thermocouple...
by Jill Ahrens | Apr 14, 2016
Company: Power Plant Challenge: A power plant has installed a Frame 7E gas turbine. As is often the case with OEM parts, they were not satisfied with the exhaust gas thermocouple supplied by the OEM. The sensor proved too difficult to install, replace, service and...
by conax_admin | Mar 29, 2016
Challenge: A Conax customer needed a source for flashback thermocouples on a Siemens Westinghouse W501F gas turbine. They currently have four turbines with plans to bring two more on line in the future. Each turbine has 16 burner cans with two sensors on each burner...